RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Valve seat angle: Specifications: Intake Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30° Exhaust Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45° Valves, Checking Figure 60-80-228 Figure 60-80-230 P-56793 P-63070 Measure the valve stem diameter [Figure 60-80-228] . Measure the valve seat width [Figure 60-80-230] . Specifications: Width (Intake) . . . . . 0.106 ± 0.016 inch. (1,27 ± 0,4 mm) (Exhaust) . . . . . 0.083 ± 0.016 inch. (2,1 ± 0,4 mm) Std. Intake Valve . . . . . . . . . . . . . . . . 0.308-0.0006 inch. (7,98-0,015 mm) Std. Exhaust Valve . . . . . . . . . . . . . . 0.313-0.0006 inch.
(7,96-0,015 mm) Figure 60-80-231 Figure 60-80-229 Angle Thickness P-63068 P-56794 Diameter Install the valves and measure the valve stem clearance [Figure 60-80-231] . Measure the valve edge thickness [Figure 60-80-229] . Specifications: Intake Valve . . . . . . . . . . . . . . . . .0.071 inch. (1,8 mm) Exhaust Valve . . . . . . . . . . . . . . .0.043 inch. (1,1 mm) Wear Limit: Intake Valve . . . . . . . . . . . . . . . 0.004 inch (0,10 mm) Exhaust Valve . . . . . . . . . . . . . 0.006 inch (1,13 mm) Measure the valve head diameter [Figure 60-80-229] . Specifications: Intake Valve . . . . . 1.618 ± 0.004 inch (41,5 ± 0,1 mm) Exhaust Valve . .1.430 ± 0.004 inch.
(35,9 ± 0,01 mm) 442 Excavator 60-80-66 Service Manual