Bobcat Company 442 — Control Rod Guide Bushing Removal

RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-112 Control Rod Guide Bushing Removal Figure 60-81-110 P-56731 Remove the cover [Figure 60-81-112] . P-56729 Figure 60-81-113 Remove the parallel pin [Figure 60-81-110] . Figure 60-81-111 P-56732 Drill a 7/32 inch (5,5 mm) hole on one side of the pipe [Figure 60-81-113] . P-56730 NOTE: Carefully clean the engine block after drilling. Remove the control rod and spring [Figure 60-81-111] . 442 Excavator 60-81-31 Service Manual