Bobcat Company 442 — Turbo Charger Removal and Installation

RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-240 Turbo Charger Removal and Installation Figure 60-81-238 P-56984 1 Remove the air inlet hose (Item 1) [Figure 60-81-240] . P-56986 Figure 60-81-241 Remove the lube oil line [Figure 60-81-238] . Installation: Tighten the bolt to 21 ft.-lb. (29 N•m) torque. Figure 60-81-239 1 1 P-56983 Remove the bolts (Item 2) [Figure 60-81-241] . Installation: Tighten the bolts to 15 ft.-lb. (21 N•m) torque. P-56985 Remove the vent pipe (Item 1) [Figure 60-81-239] . Installation: Initially tighten the bolt to 6 ft.-lb. (8.5 N•m) torque. Final tighten the bolts to 9 ft.-lb. (12.5 N•m) torque.

442 Excavator 60-81-70 Service Manual