HYDRAULIC SYSTEM INFORMATION (CONT’D) Figure 20-10-2 Description 2 IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. I-2003-0888 1 P-32843 The hydraulic system has two separate hydraulic circuits. The piston pump circuit supplies fluid to the six spool hydraulic control valve. The coupler (Item 2) [Figure 20-10-2] is used to check the load sense relief valve, safety relief valve and piston pump torque limiter supply adjustment.
The six spool control valve contains the boom, arm, bucket auxiliary, left and right travel valve sections. The gear pump circuit supplies fluid to the three spool hydraulic control valve. Figure 20-10-1 The three spool control valve contains the upperstructure swing, blade and boom swing valve sections. Figure 20-10-3 1 1 P-33367 A load sense relief valve (Item 1) [Figure 20-10-1] and safety relief valve (Item 1) [Figure 20-10-2] protect the valve from high pressure. P-33373 A main relief valve (Item 1) [Figure 20-10-3] protects the valve from high pressure. 442 Excavator 20-10-6 Service Manual