HEATER/AC FAN Figure 70-20-3 Removal And Installation Remove the evaporator/heater unit. (See EVAPORATOR/HEATER UNIT (S/N 522311001 & ABOVE) on Page 70-10-1 or See EVAPORATOR/ HEATER UNIT (S/N 528911001 & ABOVE AND 528611001 & ABOVE) on Page 70-11-1.) 1 Remove the thermostat. (See THERMOSTAT on Page 70-190-1.) 1 Mark around the edges of both mount brackets. Figure 70-20-1 P-40356 2 Remove the two screws (Item 1) [Figure 70-20-3] from both ends. Figure 70-20-4 1 1 P-40350 Remove the bolt (Item 1) [Figure 70-20-1] , washer and mount (Item 2) [Figure 70-20-1] from both sides.
2 Figure 70-20-2 P-40357 Cut and remove the cable ties (Item 1) [Figure 70-20-4] 1 1 Remove the nut (Item 2) [Figure 70-20-4] washers, ground wires and thermostat mount. 1 P-40355 Remove the four screws (Item 1) [Figure 70-20-2] from both sides. 442 Excavator 70-20-1 Service Manual