HEATER VALVE Figure 70-30-3 Removal And Installation Drain the radiator. (See COOLING SYSTEM on Page 10- 70-1.) Tilt the cab. (See Tilting The Cab on Page 10-160-2.) Figure 70-30-1 1 1 1 1 P-40343 2 Loosen the hose clamps (Item 1) [Figure 70-30-3] . Figure 70-30-4 P-40346 Remove the four nuts (Item 1) [Figure 70-30-1] and washers. Remove the filter (Item 2) [Figure 70-30-1] . 1 1 Figure 70-30-2 P-40344 Mark and remove the hoses (Item 1) [Figure 70-30-4] 1 Lower the valve out of the cab. 1 P-40347 Cut and remove the cable ties (Item 1) [Figure 70-30-2] . 442 Excavator 70-30-1 Service Manual