Bobcat Company 442 — Engine Coolant By-Passing The Heater Valve

BASIC TROUBLESHOOTING (CONT’D) Figure 70-80-47 Engine Coolant By-Passing The Heater Valve 1 S/N 522311001 & Above Figure 70-80-46 1 2 3 P-36826 Figure 70-80-48 P-32714 S/N 528911001 & Above And S/N 528611001 & Above Push the A/C switch (Item 1) to the OFF position. Turn the fan switch (Item 2) to the High Speed position., Turn the temperature control (Item 3) [Figure 70-80-46] to the High A/C position, with the key switch OFF. 1 Start the excavator and run at high idle, for ten minutes. P-63536 Check the temperature of the heater hoses (Item 1) [Figure 70-80-47] or [Figure 70-80-48] . If the hoses are hot, the heater valve is leaking internally, and needs to be replaced.

442 Excavator 70-80-15 Service Manual