Bobcat Company 442 — Compressor Clutch Disassembly And Assembly

COMPRESSOR (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 70-141-15 Compressor Clutch Disassembly And Assembly (Cont’d) 1 Figure 70-141-13 1 1 1 P-61580 Remove the three screws (Item 1) [Figure 70-141-15] from the compressor. P-61578 Installation: Tighten the screws to 2.9-4.3 ft.-lbs. (4-6 Nm) torque. Remove the bolt (Item 1) [Figure 70-141-13] from the shaft. Remove the coil from the compressor. Figure 70-141-14 The compressor is not serviceable and must be replaced as a complete unit. 1 P-61579 Slide the grommet and wire harness (Item 1) [Figure 70- 141-14] from the wire holder. 442 Excavator 70-141-5 Service Manual