PRESSURE SWITCH (S/N 528911001 & ABOVE AND 528611001 & ABOVE) Figure 70-171-2 Removal And Installation Open the right side cover. NOTE: The pressure switch can be removed without discharging the A/C system. Figure 70-171-1 1 P-40464 1 The valve (Item 1) [Figure 70-171-2] is located in the receiver/drier and is located under the pressure switch. 2 Remove the refrigerant from the A/C system. (See SYSTEM CHARGING AND RECLAMATION on Page 70- 130-1.) P-63305 Remove the pressure switch. With a tire valve core removal tool, remove the valve core. Disconnect the wire harness (Item 1) [Figure 70-171-1] . Remove the switch (Item 2) [Figure 70-171-1] from the receiver/drier. Replace with a new core.
WARNING In the event of a leakage, wear safety goggles. Escaping refrigerant can cause severe injuries to eyes. In contact with a flame, R134a refrigerant gives a toxic gas. W-2371-0500 442 Excavator 70-171-1 Service Manual