THERMOSTAT Figure 70-190-3 Removal And Installation NOTE: The thermostat can be changed without evacuating the A/C system, or removing the evaporator/heater unit from the excavator. 1 Remove the seat and seat mount. (See SEAT AND SEAT MOUNT on Page 40-30-1.) 1 Figure 70-190-1 2 P-40351 Mark and remove the wires (Item 1) [Figure 70-190-3] . 1 Remove the nut (Item 2) [Figure 70-190-3] . Figure 70-190-4 P-40352 Remove the thermostat probe (Item 1) [Figure 70-190-1] from the evaporator. 1 Figure 70-190-2 P-40354 1 Straighten the thermostat probe and pull the thermostat (Item 1) [Figure 70-190-4] out of the housing. P-40353 Cut and remove the cable tie (Item 1) [Figure 70-190-2] .
442 Excavator 70-190-1 Service Manual