Bobcat Company 442 — Removal And Installation

EXPANSION VALVE Figure 70-200-2 Removal And Installation 2 Evacuate the A/C system. (See SYSTEM CHARGING AND RECLAMATION on Page 70-130-1.) Remove the evaporator/heater unit. (See EVAPORATOR/HEATER UNIT (S/N 522311001 & ABOVE) on Page 70-10-1 or See EVAPORATOR/ HEATER UNIT (S/N 528911001 & ABOVE AND 528611001 & ABOVE) on Page 70-11-1.) 3 1 WARNING P-40371 In the event of a leakage, wear safety goggles. Escaping refrigerant can cause severe injuries to eyes. In contact with a flame, R134a refrigerant gives a toxic gas. Remove the clamp (Item 1) [Figure 70-200-2] . Loosen the nut (Item 2) and remove the expansion valve (Item 3) [Figure 70-200-2] .

W-2371-0500 Figure 70-200-1 1 1 P-40370 Remove the A/C tape (Item 1) [Figure 70-200-1] 442 Excavator 70-200-1 Service Manual