HYDRAULIC EXCAVATOR SPECIFICATIONS (CONT’D) Drive System Brakes Undercarriage Track 442 Excavator SPEC-10-5 Service Manual Final Drive Each Track is Driven by an Axial Piston Motor Type of Reduction Two Stage Planetary Gear Reduction Max. Drawbar Pull 13613 lbs. (60.5 KN)) Gradability 60% Travel NA Service & Parking NA Swing NA Service Spring loaded multi disc brake applied when control lever is in neutral Parking NA Type Crawler-Tractor Design, Sealed Track Rollers W/Box-Section Track Roller Frame. Grease Type Track Adjusters W/Shock Absorbing Recoil Springs. Type Rubber (Standard) Steel (Optional) Width 18 inch (457 mm) NA No. of Shoes NA 42 No.
of Track Rollers 7 7 Ground Pressure 4.1 PSI (0.28 bar) 4.23 PSI (0.29 bar)