Bobcat Company 442 — Specifications

ENGINE BOLT TORQUE (S/N 522311001 & ABOVE) (CONT’D) Specifications (Cont’d) 442 Excavator SPEC-30-2 Service Manual Ft.-lb.

(Nm) Fuel Clamping Plate Pump Bolts 15-18 (20-24) Fuel Shut Off Solenoid Bolts 15 (21) Glow Plugs 13-16 (18-22) Governor Control Rod Bolts 7-9 (10-12) Governor Drive Gear Mount Bolt 16 (21) Governor Mount Bolts 11-14 (15,5-18,5) Governor Mount Bolt Retaining Plate Bolts 14-17 (19-23) Idler Pulley Mount Nut 14-17 (19-23) Injector Clamping Pad Bolts 12-15 (16-21) Injector Line Cap Nut 18-21 (25-28,5) Injector Pump Mount Bolts Step 1 5 (7) Step 2 7 (10) Step 3 22 (30) Main Bearing Cap Bolts 22 (30) Plus 60 degrees, 60 degrees = 120 degrees Oil Cooler Collar Screws (Initial) 59 (80) (Final) 118 (160) Oil Cooler Mount Bolts 14-17 (19-23) Oil Cooler Plugs 59 (80) Oil Pan Mount Bolts (Steel) 14-17 (19-23) (Cast) 20-23 (27-31) Oil Pan Drain Plug 6-7 (8-9) Oil Pump Mount Bolts 6-7 (8-9) Oil Pressure Control Valve 27-32 (36-44) Oil Pressure Pipe (Top) 19-24 (26-32) (Bottom) 26-32 (35-43) Oil Pressure Switch 12-15 (16-20) Oil Return Line Cap Nut NA Oil Return Pipe 28-31 (38-42) Oil Suction Pipe 14-17 (19-23) Oil Temperature Switch N.A Overflow Valve 22 (30) Rocker Arm Cylinder Head Bolts 15 (21) Rocker Arm Bolts NA Rocker Arm Set Screw Locknut 13-16 (18-22) Starter Collar Nut 30 (40) Starter Mount Bolts 52 (70)