Bobcat Company 442 — Specifications

ENGINE BOLT TORQUE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Specifications (Cont’d) 442 Excavator SPEC-31-2 Service Manual Ft.-lb.

(Nm) Fuel Lift Pump Bolts 15 (21) Fuel Shut Off Solenoid Bolts 10-12 (13,5-16,3) Governor Lever Shaft Bolts 7 (9,2) Governor Cover Bolts 3 (4,5) Governor Mount Bolts 7 (9,2) Idle Speed Bolts 3-4 (4,2-5) Idler Pulley Mount Bolts 33 (45) Injector Clamping Pad Bolts 16 (21) Injector Line Cap Nut 10-12 (13,5-16,5) Injector Line Clamping Pad Bolts 16 (21) Injector Nozzle Cap Nut 29-37 (40-50) Injector Pump Mount Bolts 15 (21) Main Bearing Cap Bolts 37 (50) Plus 60 degrees, 45 degrees = 105 degrees Minimum Speed Screw Lock Nut 3 (4,5) Oil Pan Mount Bolts (Steel) 15 (21) (Cast) 30 mm long) 16 (21) (Cast 55 mm long) 16 (21) Oil Pan Drain Plug 40 (55) Oil Pump Mount Bolts 14-17 (18,9-23,1) Oil Pressure Pipe 82 (111) Oil Pressure Switch 8-11 (11,5-14,5) Oil Return Clamping Pad 6 (8,5) Oil Return Pipe 30 (40) Oil Suction Pipe 15 (21) Oil Temperature Sensor 17-20 (22,5-27,5) Oil Temperature Switch 17-21 (22,5-27,5) Rear Cover Bolts 15 (21) Rocker Arm Bracket Bolts 15 (21) Starter Mount Bolts 32 (43,5)