** ENGINE OIL SPECIFICATIONS When fuel sulphur content is less than 0.5% change the engine oil and filter as shown in the Service Schedule (See SERVICE SCHEDULE on Page 10-50-1.) Change engine oil and filter according to the following chart if fuel sulphur content is above 0.5%. *** COOLANT MIXTURE Ethylene Glycol (Factory Installed) Add premixed coolant; 50% water and 50% ethylene glycol to the surge tank if the coolant level is low. Use a refractometer to check the condition of ethylene glycol in the cooling system. 442 Excavator SPEC-70-2 Service Manual FUEL SULPHUR CONTENT CHANGE INTERVAL OF ENGINE & OIL FILTER 0.5 - 1.0% 1/2 of Regular Interval Above 1.0% 1/4 of Regular Interval