BUCKET CYLINDER (CONT’D) Figure 20-23-97 Assembly (Cont’d) Figure 20-23-95 P7427 Install the rod seal on the rod seal tool [Figure 20-23-97] . P-36085 NOTE:‘ During installation the spring side of the seal must be toward the inside of the cylinder. Figure 20-23-96 Rotate the handles to collapse the rod seal [Figure 20- 23-97] . Figure 20-23-98 1 P-36086 Make sure the bearing is fully seated in the housing [Figure 20-23-95] and install the snap ring (Item 1) [Figure 20-23-96] . P-36081 Install the rod seal in the head [Figure 20-23-98] . 442 Excavator 20-23-11 Service Manual