BLADE CYLINDER (CONT’D) Figure 20-24-30 Assembly Use the following tools to assemble the cylinder. MEL1396 - Universal Seal Expander MEL1033 - Rod Seal Installation Tool Piston Ring Compressor Wash the cylinder parts in clean solvent and dry with compressed air. Inspect the cylinder parts for nicks, scratches or other damage. Replace any damaged parts. P7427 Always install new O-rings and seals during assembly. Lubricate all O-rings and seals with hydraulic oil during assembly. Install the rod seal on the rod seal tool [Figure 20-24-30] . NOTE: During installation, the spring side of the seal must be toward the inside of the cylinder.
Figure 20-24-29 Rotate the handles to collapse the rod seal [Figure 20- 24-30] . 1 2 Figure 20-24-31 P-35972 Install the bearing (Item 1) and snap ring (Item 2) [Figure 20-24-29] in the rod. P-35976 Install the two rod seals in the head [Figure 20-24-31] . 442 Excavator 20-24-10 Service Manual