Bobcat Company 442 — Disassembly And Assembly

SIX SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-40-16 Disassembly And Assembly Clean the outside of the valve with clean solvent. Figure 20-40-14 1 1 2 1 P-35238 1 Remove the tie rod nuts (Item 1) [Figure 20-40-16] . Installation: Tighten the nuts to 18 ft.-lb. (25 N•m) torque. P-35236 Remove the 3 bolts (Item 1) [Figure 20-40-14] . Figure 20-40-17 Remove the mount (Item 2) [Figure 20-40-14] . Figure 20-40-15 1 1 P-35239 Remove the outlet section (Item 1) [Figure 20-40-17] . P-35237 Installation: Install the washers (Item 1) [Figure 20-40- 15] between the valve and mount. Tighten the bolts to 111-129 ft.-lb. (150-175 N•m) torque. 442 Excavator 20-40-6 Service Manual