SIX SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-40-40 Boom, Arm, Bucket And Auxiliary Valve Section Disassembly And Assembly NOTE: The disassembly and assembly procedure is shown on the auxiliary valve section. The procedure is the same for all valve sections, except where noted. 1 Figure 20-40-38 1 P-35262 1 Remove the plastic plug (Item 1) [Figure 20-40-40] . Figure 20-40-41 P-35261 Remove the relief valves (Item 1) [Figure 20-40-38] . Installation: Tighten the valves to 52 ft.-lb. (70 N•m) torque. 1 Figure 20-40-39 P-35263 1 1 Remove the plug (Item 1) [Figure 20-40-41] . 2 P-35260 Remove the O-rings (Item 1) and back-up ring (Item 2) [Figure 20-40-39] .
442 Excavator 20-40-12 Service Manual