Bobcat Company 442 — Inlet Valve Section Disassembly And Assembly

SIX SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-40-57 Inlet Valve Section Disassembly And Assembly Figure 20-40-55 2 1 1 2 P-35273 Remove the O-rings (Item 1) and back-up ring (Item 2) [Figure 20-40-57] from the backup relief valve. P-35271 Remove the load sense relief valve (Item 1) [Figure 20- 40-55] . Figure 20-40-58 Installation: Tighten the load sense valve to 18 ft.-lb. (25 N•m) torque. Remove the backup relief valve (Item 2) [Figure 20-40- 55] . 1 Installation: Tighten the backup relief valve to 52 ft.-lb. (70 N•m) torque. Figure 20-40-56 P-35274 2 Remove the load sense bleed cartridge (Item 1) [Figure 20-40-58] Installation: Tighten the cartridge to 15 ft.-lbs. (20 Nm) torque.

1 P-35272 Remove the O-rings (Item 1) and back-up ring (Item 2) [Figure 20-40-56] from the load sense relief valve. 442 Excavator 20-40-17 Service Manual