Bobcat Company 442 — Coupler Removal And Installation

HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-45 Coupler Removal And Installation 1 Figure 20-50-43 1 P-35316 Installation: Slide the coupler on the pump shaft (Item 1) [Figure 20-50-44] until the coupler snap ring (Item 1) [Figure 20-50-45] is tight against the shaft. P-35315 Remove the bolt (Item 1) [Figure 20-50-43] from the coupler. Slide the coupler off the pump shaft. Installation: Tighten the bolt to 63 ft.-lb. (86 N•m) torque. Figure 20-50-44 1 P-35318 442 Excavator 20-50-18 Service Manual