HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-58 Torque Limiter Valve Disassembly (Cont’d) Figure 20-50-56 1 2 P-35325 1 Loosen the large nut (Item 1) [Figure 20-50-58] . P-35323 Turn the small nut (Item 2) [Figure 20-50-58] to remove the adjustment body. Remove the O-ring (Item 1) [Figure 20-50-56] . Figure 20-50-59 The following procedures are only used if the adjustment assembly is removed. NOTE: If the adjustment assembly is removed and/or disassembled, the torque limiter must be tested and adjusted after the pump assembly is installed in the machine. See “Initial Torque Limiter Valve Setting” on page 29.
for torque limiter adjustment) 1 Figure 20-50-57 2 P-35326 With an Allen wrench hold the adjustment bolt (Item 1) and loosen the nut (Item 2) [Figure 20-50-59] . 1 P-35324 Remove the dust cap (Item 1) [Figure 20-50-57] . 442 Excavator 20-50-23 Service Manual