Bobcat Company 442 — Assembly

HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-136 Assembly IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. 1 I-2003-0888 N-23418 Clean parts in solvent and dry with compressed air. Apply Loctite™ 241 on the threads and install the stroking piston (Item 1) [Figure 20-50-136] in the hole and tighten. Replace any worn or damaged parts.

Figure 20-50-135 Figure 20-50-137 1 2 1 N-23419 Apply Loctite™ 241 on the threads and install the destroking piston (Item 1) in the hole next to the alignment pin (Item 2) [Figure 20-50-135] and tighten. N-23417 Install the bearing race (Item 1) [Figure 20-50-137] in the port block assembly. 442 Excavator 20-50-48 Service Manual