HYDRAULIC GEAR PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-51- 45 Assembly (Cont’d) Figure 20-51- 43 1 1 P-35001 Position the bearings as shown and install the load seal and load seal back-up ring (Item 1) [Figure 20-51- 45] . P-35002 Figure 20-51- 46 Install the plug (Item 1) [Figure 20-51- 43] in the bearings. 1 Figure 20-51- 44 2 1 P-35008 Turn the bearing assembly over and install the bearings (Item 1) [Figure 20-51- 46] on the plate. P-33994 Install the load seal back-up ring (Item 1) in the groove of the load seal (Item 2) [Figure 20-51- 44] . 442 Excavator 20-51-13 Service Manuall