HYDRAULIC GEAR PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-51- 57 Assembly (Cont’d) Figure 20-51- 55 1 2 1 P-35000 Turn the bearing assembly over and install the bearings (Item 1) [Figure 20-51- 57] on the plate. P-33994 Figure 20-51- 58 Install the load seal back-up ring (Item 1) in the groove of the load seal (Item 2) [Figure 20-51- 55] . Figure 20-51- 56 1 1 P-33999 Install the gear (Item 1) [Figure 20-51- 58] . P-35001 Position the bearings as shown and install the load seal and load seal back-up ring (Item 1) [Figure 20-51- 56] . 442 Excavator 20-51-16 Service Manual