HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-33 Removal And Installation (Cont’d) Figure 20-52-31 1 1 P-58535 Remove the bolts (Item 1) [Figure 20-52-32] & [Figure 20-52-33] and washers. P-58533 Installation: Tighten the bolts to 125-140 ft.-lb. (170-190 N•m) torque. The hose (Item 1) [Figure 20-52-31] will be removed from the inlet fitting as the pump is removed. Figure 20-52-34 Figure 20-52-32 1 1 P-58536 P-58534 Install a sling (Item 1) [Figure 20-52-34] on the pump. Separate the pump from the engine and remove the pump. 442 Excavator 20-52-14 Service Manual