Bobcat Company 442 — Torque Limiter Valve Disassembly

HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-47 Torque Limiter Valve Disassembly (Cont’d) Figure 20-52-45 3 2 1 1 P-58607 Remove the fittings (Item 1) [Figure 20-52-47] . P-58605 Figure 20-52-48 Remove the spring seat (Item 1). Remove the two springs (Item 2 & 3) [Figure 20-52-45] . 1 1 Figure 20-52-46 P-58608 1 1 1 Remove the O-rings (Item 1) [Figure 20-52-48] from the fittings and plugs. P-58606 The following procedures are only used if the adjustment assembly is removed. Remove the plugs (Items) [Figure 20-52-46] . NOTE:

If the adjustment assembly is removed and/or disassembled, the torque limiter must be tested and adjusted after the pump assembly is installed in the machine. See “Initial Torque Limiter Valve Setting” on page 26.) 442 Excavator 20-52-19 Service Manual