HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-84 Pump Control Disassembly And Assembly (Cont'd) Pump Margin Control (Cont'd) Figure 20-52-82 2 1 1 N-23366 Before disassembling the torque limiter supply control, remove the O-ring washer (Item 1) [Figure 20-52-84] from the adjustment assembly. N-23363 Measure the adjustment screw (Item 2) [Figure 20-52- 84] , thread length for the correct initial adjustment. Check the O-ring washer (Item 1) [Figure 20-52-82] and replace as needed. Figure 20-52-85 Torque Limiter Supply Control Figure 20-52-83 1 N-23367 1 Loosen the jam nut (Item 1) [Figure 20-52-85] .
N-23365 Remove the cap (Item 1) [Figure 20-52-83] . 442 Excavator 20-52-32 Service Manual