HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-127 Assembly Clean parts in solvent and dry with compressed air. 1 Apply oil or assembly lube to new O-rings. Figure 20-52-125 1 2 N-23416 Install the spacer (Item 1) [Figure 20-52-127] in the back port assembly. Figure 20-52-128 N-23419 Apply Loctite™ 241 on the threads and install the destroking piston (Item 1) in the hole next to the alignment pin (Item 2) [Figure 20-52-125] and tighten. Figure 20-52-126 1 1 N-23417 Install the bearing race (Item 1) [Figure 20-52-128] in the back port assembly.
N-23418 Apply Loctite™ 241 on the threads and install the stroking piston (Item 1) [Figure 20-52-126] in the hole and tighten. 442 Excavator 20-52-45 Service Manual