TRAVEL MOTOR Figure 20-70-3 Removal And Installation 2 Remove the track. (See Rubber Track Removal And Installation on Page 30-20-6.) 1 Remove the drive sprocket. (See Drive Sprocket Removal And Installation on Page 30-30-5.) Figure 20-70-1 1 1 P-40958 1 Remove the bolts (Item 1) from the flange (Item 2) [Figure 20-70-3] . Installation: Clean and dry the threads. Apply thread lock adhesive (Loctite™ 242) to the bolt threads. Tighten the bolts to 118-133 ft.-lb. (160-180 N•m) torque. 1 2 1 P-40960 Remove the flange. Remove the travel motor. Remove the 5 bolts (Item 1) and washers from the cover (Item 2) [Figure 20-70-1] . Remove the cover.
Figure 20-70-2 1 1 1 P-40957 Remove the four hoses (Item 1) [Figure 20-70-2] . Install caps and plugs. 442 Excavator 20-70-1 Service Manual