TRAVEL MOTOR (CONT’D) Figure 20-70-73 Assembly The tools listed will be needed to assemble the travel motor: 1 MEL XXXX Spanner Wrench. Clean all parts in solvent and dry with compressed air. Inspect all parts and replace any that are damaged. If any of the planetary gears are damaged, replace all the planetary gears and sun gear from the planetary assembly that is damaged. One damaged gear can cause a microscopic fatigue crack in mating teeth and cause premature failure after servicing. Apply oil to all O- rings (as noted) and assembly lube to the bearings before installation. P-58847 Install the spring (Item 1) [Figure 20-70-73] in the piston.
Figure 20-70-72 Figure 20-70-74 2 1 1 P-61807A P-61807 Install the seal (Item 1). Install the bearing race (Item 2) [Figure 20-70-72] . Install the piston assembly (Item 1) [Figure 20-70-74] . 442 Excavator 20-70-20 Service Manual