SWIVEL JOINT Figure 20-80-3 Removal And Installation 1 1 1 IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. I-2003-0888 P-38631 Tilt the cab. (See Tilting The Cab on Page 10-160-2.) Figure 20-80-1 Loosen the 3 right bolts (Item 1) [Figure 20-80-3] . Figure 20-80-4 1 1 1 1 1 2 P-38636 P-38630 Mark and remove the 4 hoses (Item 1) [Figure 20-80-1] from the top of the swivel joint. Figure 20-80-2 Remove the 3 left bolts (Item 1) [Figure 20-80-4] and washers. 1 Remove the cover (Item 2) [Figure 20-80-4] .
1 1 1 P-38638 Mark and remove the 4 hoses (Item 1) [Figure 20-80-2] from the side of the swivel joint. 442 Excavator 20-80-1 Service Manual