SWING MOTOR (CONT’D) Figure 20-90-51 Assembly (Cont’d) Figure 20-90-49 2 3 1 1 P-38681 1 Install the 3 O-rings (Item 1) and 2 back-up rings (Items 2 & 3) [Figure 20-90-51] on the two crossport relief valves. P-38684 Align the dowel pin (Item 1) in the end cap with the hole (Item 2) [Figure 20-90-49] in the valve plate. Install the end cap on the housing. NOTE: The back-up ring (Item 2) is thicker than the back-up ring (Item 3) [Figure 20-90-51]. Figure 20-90-52 Figure 20-90-50 1 1 1 1 P-38677 P-38682 Install the crossport relief valves (Item 1) [Figure 20-90- 52] and tighten to __ ft.-lb. (__ N•m) torque. Install the 2 long bolts (Item 1) and 3 short bolts (Item 2) [Figure 20-90-50] .
Tighten the bolts to ___ ft.-lb. (__ N•m) torque. 442 Excavator 20-90-14 Service Manual