SWING MOTOR DRIVE CARRIER (CONT’D) Figure 20-91-29 Disassembly (Cont’d) Figure 20-91-27 2 1 P-38930 Remove the washer (Item 1) [Figure 20-91-29] . P-38928 Remove the planetary gear carrier (Item 2) [Figure 20- 91-29] . Use a pry bar to remove the planetary gear and bearing assembly [Figure 20-91-27] . Figure 20-91-30 NOTE: The bearings are not caged. There are 52 roller bearings per gear. Figure 20-91-28 1 Support the carrier in a press. Clamp the carrier shaft with approximately 800 lb. (1085 N•m) of force [Figure 20-91-30] . P-38929 Remove the snap ring (Item 1) [Figure 20-91-28] . 442 Excavator 20-91-9 Service Manual P P -38997