SWING BRAKE VALVE Figure 20-92-3 Removal And Installation Open the rear cover. Figure 20-92-1 1 P-33381 1 Remove the 2 bolts (Item 1) [Figure 20-92-3] and washers. P-33379 Installation: Tighten the bolts to 6-7 ft.-lb. (8-10 N•m) torque. Remove the wire harness (Item 1) [Figure 20-92-1] . Remove the valve. IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. I-2003-0888 Figure 20-92-2 1 1 P-33380 Mark and remove the three hoses (Item 1) [Figure 20- 92-2] . 442 Excavator 20-92-1 Service Manual