JOYSTICK CONTROL PATTERN SELECTOR VALVE Figure 20-100-3 Removal And Installation 2 Tilt the cab. (See Tilting The Cab on Page 10-160-2.) Figure 20-100-1 3 1 4 4 1 P-33158 1 Remove the two bolts (Item 1) [Figure 20-100-3] . Installation: Install 2 washers (Item 2) between the frame and valve. Install 3 washers (Item 3) between the valves and install 1 washer (Item 4) [Figure 20-100-3] on the bolts. Tighten the bolts to 6-7 ft.-lb. (8-10 N•m) torque. P-33156 Mark and remove the wire harness (Item 1) [Figure 20- 100-1] . IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean.
Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. I-2003-0888 Figure 20-100-2 1 1 1 1 P-33157 Mark and remove the 8 hoses (Item 1) [Figure 20-100- 2] . 442 Excavator 20-100-1 Service Manual