JOYSTICK LOCKOUT/TWO SPEED VALVE (S/N 522311001 & ABOVE) Figure 20-101-2 Removal And Installation Tilt the cab. (See Tilting The Cab on Page 10-160-2.) Figure 20-101-1 1 1 P-33163 1 2 Mark and remove the 4 hoses (Item 1) [Figure 20-101- 2] . P-33162 Figure 20-101-3 Mark and remove the wire harness (Item 1) [Figure 20- 101-1] . Mark and remove the two speed wire harness (Item 2) [Figure 20-101-1] . 1 IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system.
1 P-33164 Remove the 2 bolts (Item 1) [Figure 20-101-3] and washers. I-2003-0888 Installation: Tighten the bolts to 15-18 ft.-lb. (20-25 N•m) torque. 442 Excavator 20-101-1 Service Manual