Bobcat Company 442 — Disassembly And Assembly

JOYSTICK LOCKOUT/TWO SPEED VALVE (S/N 522311001 & ABOVE) (CONT’D) Figure 20-101-10 Disassembly And Assembly (Cont’d) Figure 20-101-8 1 1 1 1 P-36223 NOTE: Do not remove the 4 fittings (Item 1) [Figure 20-101-10]. The fittings are welded to the valve block. Removing the fittings will damage the fittings and valve block. P-36221 Remove the spool (Item 1) [Figure 20-101-8] Installation: Clean all components with solvent and dry with compressed air. Figure 20-101-9 Inspect all parts and replace any that are damaged. Use new O-rings and back-up rings. 1 Apply clean hydraulic oil to the O-rings and back-up rings during assembly.

1 2 2 P-36222 Remove the 3 O-rings (Item 1) and 4 back-up rings (Item 2) [Figure 20-101-9] . 442 Excavator 20-101-4 Service Manual