HYDRAULIC RESERVOIR (CONT’D) Figure 20-130-15 Removal And Installation (Cont’d) Figure 20-130-13 1 1 P-40548 Mark and remove the 2 hoses (Item 1) [Figure 20-130- 15] from the right hand side of the hydraulic reservoir. P-40544 Mark and remove the 2 wires (Item 1) [Figure 20-130-13] from the fuel sending unit. Figure 20-130-16 Figure 20-130-14 1 1 2 P-35231 Loosen the clamp (Item 1) [Figure 20-130-16] . Rotate the clamp to provide clearance to the suction fitting bolts. P-40547 Remove the 2 bolts (Item 1) and nuts from the swing brake valve (Item 2) [Figure 20-130-14] . Remove the swing brake valve. 442 Excavator 20-130-4 Service Manual