Bobcat Company 442 — Disassembly And Assembly

SECONDARY FRONT AUXILIARY VALVE (CONT’D) Figure 20-150-6 Disassembly And Assembly Figure 20-150-4 1 1 1 1 P-36234 Remove the coils (Item 1) [Figure 20-150-6] . P-36233 Figure 20-150-7 Remove the nuts (Item 1) [Figure 20-150-4] from the spools. Installation: Tighten the nuts to 3-5 ft.-lbs (4-7 N•m) torque. NOTE: Overtightening the coil nuts may cause spool or coil failure. 1 1 Figure 20-150-5 1 P-36236 Remove the O-rings (Item 1) [Figure 20-150-7] . 1 Figure 20-150-8 P-36235 Remove the O-rings (Item 1) [Figure 20-150-5] . 1 1 P-36237 Loosen the actuators (Item 1) [Figure 20-150-8] . 442 Excavator 20-150-3 Service Manual