Bobcat Company 442 — Disassembly And Assembly

SECONDARY FRONT AUXILIARY VALVE (CONT’D) Figure 20-150-15 Disassembly And Assembly (Cont’d) 1 Figure 20-150-13 1 P-36243 1 1 Do not remove the 4 fittings (Item 1) [Figure 20-150-15] . The fittings are welded to the valve block. Removing the fittings will damage the fittings and valve block. P-36241 Remove the 4 bolts (Item 1) and plate (Item 2) [Figure 20-150-13] from the valve body. Installation: Clean all components with solvent and dry with compressed air. Figure 20-150-14 Inspect all parts and replace any that are damaged. Use new O-rings and back-up rings. 1 Apply clean hydraulic oil to the O-rings and back-up rings during assembly.

1 P-36242 Remove the 4 O-rings (Item 1) [Figure 20-150-14] from the valve body. 442 Excavator 20-150-5 Service Manual