AUXILIARY HYDRAULIC FLOW CONTROL VALVE (S/ N 522311001 & ABOVE) Figure 20-170-2 Removal And Installation Tilt the cab. (See Tilting The Cab on Page 10-160-2.) 1 IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. P-33250 I-2003-0888 Remove the 2 nuts (Item 1) [Figure 20-170-2] and washers. Remove the valve. Figure 20-170-1 1 1 1 P-33249 Mark and remove the 3 hoses (Item 1) [Figure 20-170- 1] . 442 Excavator 20-170-1 Service Manual