Bobcat Company 442 — Disassembly And Assembly

AUXILIARY HYDRAULIC FLOW CONTROL/ HYDRAULIC BREAKER APPLICATION VALVE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-171-6 Disassembly And Assembly Figure 20-171-4 1 P-58079 1 Remove the coil (Item 1) [Figure 20-171-6] . Figure 20-171-7 P-58077 Remove the nut (Item 1) [Figure 20-171-4] . Installation: Tighten the nut to 3-5 ft.-lbs (4-7 N•m) torque. NOTE: Overtightening the coil nut may cause spool or coil failure. 1 Figure 20-171-5 P-58080 1 Remove the O-ring [Figure 20-171-7] . P-58078 Remove the O-ring (Item 1) [Figure 20-171-5] . 442 Excavator 20-171-3 Service Manual