Bobcat Company 442 — Removal And Installation

BOOM OFFSET VALVE Figure 20-190-17 Removal And Installation Tilt the cab. (See Tilting The Cab on Page 10-160-2.) IMPORTANT 1 1 When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. P-33229 I-2003-0888 Figure 20-190-16 Remove the 4 bolts (Item 1) [Figure 20-190-17] and washers. 1 Installation: Tighten the bolts to 15-18 ft.-lb. (20-25 N•m) torque. Figure 20-190-18 1 2 1 1 P-33228 Mark and remove the hoses (Item 1) [Figure 20-190-16] . Remove the tee fitting (Item 2) [Figure 20-190-16] .

P-33230 Remove the valve (Item 1) [Figure 20-190-18] . 442 Excavator 20-190-1 Service Manual