BOOM LOAD HOLDING VALVE (CONT’D) Figure 20-200-47 Disassembly (Cont’d) Figure 20-200-45 1 2 P-36114 1 4 3 Remove the O-ring (Item 1) [Figure 20-200-47] from the 4 plugs. (Ported plug shown.) P-36096 Remove the bolt (Item 1), washer (Item 2), spring (Item 3) and poppet (Item 4) [Figure 20-200-45] . Figure 20-200-48 Figure 20-200-46 1 1 1 P-36100 2 Remove the cap (Item 1) [Figure 20-200-48] from the relief valve. P-36097 Remove the 3 plugs (Item 1). Mark and remove the ported plug (Item 2) [Figure 20-200-46] . NOTE: Make sure the ported plug is installed in the original location. 442 Excavator 20-200-4 Service Manual