Bobcat Company 442 — Assembly

BOOM LOAD HOLDING VALVE (CONT’D) Figure 20-200-68 Assembly Clean all components with solvent and dry with compressed air. Check all components for wear or damage. Replace as needed. 2 Always use new O-rings, back-up rings and seals. Apply clean hydraulic oil to the components during assembly. 1 P-36112 IMPORTANT Install the spring retainer (Item 1) spring (Item 2) [Figure 20-200-68] in the housing. When making repairs on hydraulic system, clean the work area before disassemble and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system.

Figure 20-200-69 I-2056-0793 1 Figure 20-200-67 2 1 1 P-36111 Install the relief valve (Item 1) [Figure 20-200-69] . P-36113 Install the seals (Item 1) and O-ring (Item 2) [Figure 20- 200-67] on the relief valve. 442 Excavator 20-200-10 Service Manual