Bobcat Company 442 — Removal And Installation

BLADE Figure 30-10-3 Removal And Installation Lower the blade to the ground. Remove the blade cylinders. (See BLADE CYLINDER on Page 20-24-1.) Figure 30-10-1 1 1 P-33439 Remove the right pivot pin (Item 1) [Figure 30-10-3] . Figure 30-10-4 2 P-33437 Figure 30-10-2 1 1 P-33440 Place a hydraulic jack (Item 1) [Figure 30-10-4] under the left arm of the blade. P-33438 Remove the pivot pin (Item 2) [Figure 30-10-4] . Remove the right and left pivot pin retaining nut and bolt (Item 1) [Figure 30-10-1] & [Figure 30-10-2] . WARNING Installation: Tighten the bolts to 48-55 ft.-lb. (65-75 N•m) torque. Wear safety glasses to prevent eye injury when any of the following conditions exist:

When fluids are under pressure. Flying debris or loose material is present. Engine is running. Tools are being used. W-2019-1285 442 Excavator 30-10-1 Service Manual