UPPER TRACK ROLLER (CONT’D) Figure 30-50-22 Assembly (Cont’d) Figure 30-50-20 1 P-40713 1 Install the seal cover (Item 1) [Figure 30-50-22] . P-40751 Figure 30-50-23 Apply a light coat of grease to the outside of the inner seal (Item 1) [Figure 30-50-20] . Figure 30-50-21 1 1 P-40712 Install the snap ring (Item 1) [Figure 30-50-23] . P-40752 Turn the roller over and add 4 oz. (0.12 L) of 10W-30 oil to the assembly. Install the inner seal (Item 1) [Figure 30-50-21] . Install the outer seal, inner seal, seal cover and external snap ring. NOTE: The inner seal must be fully seated in the outer seal to prevent any leaks. 442 Excavator 30-50-7 Service Manual