HYDRAULIC SYSTEM (CONT’D) Figure 10-100-10 Hydraulic Filter Installation (S/N 522311001 & Above) Clean the filter bowl in clean solvent and dry with compressed air. 1 Figure 10-100-8 1 P-32853 Install the filter and filter bowl (Item 1) [Figure 10-100- 10] . Figure 10-100-11 P-32977 Inspect the O-rings (Item 1) [Figure 10-100-8] on the outside and inside bottom of the filter bowl. Replace the O-rings if damaged. Figure 10-100-9 1 1 P-32852 Inspect the O-ring (Item 1) [Figure 10-100-11] Replace if damaged. P-32855 Install a new filter (Item 1) [Figure 10-100-9] in the filter bowl. 442 Excavator 10-100-4 Service Manual