Bobcat Company 442 — Hydraulic Filter Installation (S/N 528911001 & Above And S/N 528611001 & Above)

HYDRAULIC SYSTEM (CONT’D) Figure 10-100-18 Hydraulic Filter Installation (S/N 528911001 & Above And S/N 528611001 & Above) Clean the filter bowl in clean solvent and dry with compressed air. 1 Figure 10-100-16 1 P-58143 Install the filter (Item 1) [Figure 10-100-18] in the filter bowl. Figure 10-100-19 P-58142 Inspect the O-ring (Item 1) [Figure 10-100-16] on the outside of the filter bowl. Replace the O-rings if damaged. 1 Figure 10-100-17 P-58216 Install the filter and filter bowl (Item 1) [Figure 10-100- 19] . 1 P-58217 Install the O-ring (Item 1) [Figure 10-100-17] in the bottom of the new filter. 442 Excavator 10-100-7 Service Manual